SAFE
PCBAI + EXPERT ENGINEERING

Built for demanding designs.

From complex stackups to precision requirements, put manufacturing expertise behind your next board.

CONTROLLED IMPEDANCE

Precision & impedance

Manufacturing details aligned with your design intent.

Impedance details ↗
1–30Layers
0.1–6.0 mmBoard thickness
620 × 1080 mmMaximum panel size
25:1Aspect ratio

Materials, processes and engineering detail.

Specifications depend on material, layer count and construction. Confirm the combined requirements with our engineers.

Capability specifications
ParameterCapabilityTechnical guide
Layer count1–30View guide ↗
Board thickness0.1–6.0 mmView guide ↗
Material familiesFR-4; IMS (aluminum); CEM-3; polyimide; high-Tg; Rogers; aluminum/copper base; flex; rigid-flexView guide ↗
Maximum panel size620 × 1080 mmView guide ↗
Minimum hole sizeProcess-dependent; confirm hole type and construction.0.08 mmView guide ↗
Minimum line width / spacingLine width and spacing depend on copper thickness and construction.2 mil (≈0.05 mm)View guide ↗
Board outline tolerance±0.10 mmView guide ↗
Dielectric layer thickness0.05–5.00 mmView guide ↗
Outer-layer copper thicknessConfirm the required copper build with engineering.18–420 µmView guide ↗
Mechanical drill sizeMechanical drilling range confirmed for this capability page.0.15–6.5 mmView guide ↗
Finished mechanical hole sizeFinished plated-hole dimensions are confirmed after plating requirements are defined.Engineering reviewContact engineering ↗
Mechanical hole diameter toleranceTolerance depends on plated or non-plated hole requirements.Engineering reviewContact engineering ↗
Mechanical registration0.075 mmView guide ↗
Aspect ratioConfirm the applicable thickness and hole diameter together.25:1View guide ↗
Solder mask typeLPI (liquid photoimageable solder mask)View guide ↗
Minimum solder mask webMinimum web depends on mask color, copper and process.Engineering reviewContact engineering ↗
Minimum solder mask clearanceConfirm whether clearance is radial or diametral.Engineering reviewContact engineering ↗
Via plugging hole diameter0.10–0.60 mmView guide ↗
Controlled impedance tolerance±10%View guide ↗
Surface finishesENIG; ENEPIG; OSP; HASL; chemical tin/Sn; electroplated hard goldView guide ↗
Solder mask colorsGreen; matte green; yellow; black; matte black; white; red; blue; purpleView guide ↗
Silkscreen colorsRed; yellow; black; whiteView guide ↗
Certification documentationReview the certificate and its applicable manufacturing scope.UL; ISO 9001:2015 + AS9100D; ISO 14001; ISO 13485; IATF 16949View guide ↗
Special processesBlind/buried vias; gold fingers; beveled edges; press-fit; BGA; countersink/counterbore; carbon ink; peelable mask; edge plating; plated half holes; electrical testingView guide ↗
Material suppliersSHENGYI; KINGBOARD (KB); VENTEC; ROGERS; TAIYO; KSMView guide ↗
PackagingVacuum packaging; desiccant; humidity indicator card; cartonView guide ↗

From standard laminates to specialized constructions.

FR-4, high-Tg, polyimide, high-frequency laminates, aluminum/copper base, flex and rigid-flex.

View guide ↗
Laminate and process material suppliers
SHENGYIKINGBOARD (KB)VENTECROGERSTAIYOKSM

Explore the details behind each specification.

View all technical information ↗

Materials, panelization, holes, finishes and quality references from our technical information library.

01MaterialsFR-4, polyimide, high-frequency laminates, metal-based boards, flex and rigid-flex, with material selection guidance.
02Single-board deliveryIndividual board requirements and options for adding technical borders.
03PanelizationRepeated or mixed boards, spacing, rails, fiducials, tooling holes, X-out and board separation.
04Copper, tracks & stackupCopper thickness, line width and spacing, and layer construction, considered together.
05Holes & microviasPTH, NPTH, microvias, plated half holes, metallization, clearance and aspect ratio guidance.
06Solder maskColor, coating thickness, clearance, minimum webs and peelable mask options.
07Silkscreen & markingSilkscreen and marking information for communicating identification requirements.
08Surface finishesSurface finish choices and technical guidance for the required board application.
09Mechanical featuresMechanical features including counterbores and edge beveling.
10StencilsStencil formats and frame options for different printing setups.
11Quality controlIn-process and final inspection information, including traceable checks.
12Certifications & complianceCertification and compliance information, with documents and applicable scope to review.
13Drying & handlingDrying guidance for board handling and assembly preparation.

Documented requirements. Traceable decisions.

Review certification scope with our team.
ULISO 9001:2015AS9100DISO 14001ISO 13485IATF 16949RoHSIPC Class 2 & 3 requirements
Applications

Lighting · Telecommunications · Computing · Industrial control · Consumer electronics · Automotive · Medical · Aerospace

Ready to review your next PCB?

Share your files and manufacturing requirements with our engineering team.

Talk to an engineerGet a quote
Put a SAFE PCB engineer on your side.Design questions, manufacturing requirements or order support.
info@safepcbglobal.com ↗

Reset password

Enter your registered email to request a password reset link.